Installation
In order to commission your seca mBCA correctly, you must make a few settings.
- The seca mBCA requires an active Internet connection via WLAN or LAN (RJ45 network cable) to transmit the measurement data.
- In order for your mBCA to establish a connection to your seca Analytics 125 Cloud, the following port on your router must be activated by you/your IT service provider.
Port: 22020 and 443
Protocol: TCP
Direction: Outgoing
Application: https
Destination address: gpx.secacloud.com (gpx.us.secacloud.com for USA)
(Please refer to the instructions for your router for the port activation setting or contact your Internet provider, seca will not carry out port activation for you for data protection reasons)
- If your seca mBCA is to be connected via WLAN, you will need the SSID (WLAN name) and password of your WLAN network. You must also ensure that your router is connected to your seca mBCA via 2.4 GHz. (Please refer to the instructions for your router for the transmission frequency (GHz) setting or contact your internet provider)
- If your seca mBCA is to be connected via LAN, please note that a 3m network cable is supplied with your seca mBCA.
For longer distances, please have a longer network cable ready.
If any of the above points have not been completed by the installation date or the relevant information is missing when the technician arrives at your premises for installation, the technician may not be able to finalise the installation of your seca mBCA.
Accordingly, another on-site appointment must be scheduled, which can lead to a longer waiting time and additional costs on your part.
Are you a new customer? Then you will find a checklist below containing important information for you.
Dear New Customer,
Welcome to the seca family! This checklist will help ensure that your seca mBCA is assembled correctly and fully integrated into your network and the seca Cloud. Whether you are performing the setup yourself or it has been completed for you, please follow the steps below to ensure a smooth installation and commissioning process.
1. Device Assembly
Here you will find both an assembly video and an assembly document.
Important: All devices should maintain a minimum distance of 1 meter from other technical equipment.
2. Open Required Ports
To ensure data transmission to the seca Cloud, the following outgoing ports must be enabled on your router or firewall:
- Port 22020 (TCP)
- Port 443 (TCP)
- Application: HTTPS
- Destination Address: gpx.secacloud.com
Please contact your IT service provider if you are unable to make these changes yourself.
3. Network Connection
Your seca mBCA can be connected to your network either via Wi-Fi or with a network cable.
Here you will find the guide for connecting via Wi-Fi.
Here you will find the guide for connecting via a network cable.
Please note: The network outlet should be located within 3 meters of the device and must already be active. For longer distances, please provide a suitably long network cable.
4. Access to the seca Cloud
The seca Cloud is available at www.secacloud.com.
If you do not yet have a tenant (cloud account), please create one first. You can then connect your device to the seca Cloud.
Here you will find the instructions for connecting your device to the seca Cloud.
For registration you will need:
- the serial number of your device platform
- the registration key you received in a separate email